Description
TER PRVV0830PE Selector Switch – 2 Position ON-ON for Hercules Joysticks
The TER PRVV0830PE Selector Switch is a genuine wired selector-switch component designed for compatible TER Hercules industrial joystick assemblies. TER identifies PRVV0830PE as a 2-position maintained ON-ON selector switch with 2 contacts plus 1 common, providing two stable operating positions for industrial machine-control applications where a maintained selection is required.
Control Devices lists the TER PRVV0830PE Selector Switch as a joystick accessory suitable for Hercules-S and Hercules-CK joysticks. Its two maintained positions distinguish it from spring-return and momentary selector switches within the wider TER Hercules range, making the PRVV0830PE suitable for compatible applications where the operator needs to make a selection that remains mechanically selected until deliberately changed.
As an electrical component within the Hercules joystick system, the PRVV0830PE provides a defined operator-control interface while the actual machine function associated with each ON position depends on the wiring and control logic of the equipment. The selector itself does not determine the machine command; instead, it provides the switching interface used by the complete machine-control system.
For machine builders, maintenance technicians and industrial operators using TER Hercules controls, PRVV0830PE provides an accurately identified manufacturer component when a 2-position maintained ON-ON selector switch is required.
TER Part Number PRVV0830PE
PRVV0830PE is the TER manufacturer part number for this specific 2-position maintained ON-ON selector-switch configuration.
Using the complete manufacturer code is important because TER offers several selector-switch variants for Hercules joystick applications. These components differ in their number of positions and in whether those positions are maintained, momentary or a combination of both operating behaviours.
Recording PRVV0830PE within bills of materials, electrical drawings, maintenance records and spare-parts inventories provides a clear reference for future replacement requirements.
The exact manufacturer code also helps distinguish PRVV0830PE from other TER selector switches that may have similar external characteristics but provide different switching functions.
2-Position Selector Switch
The PRVV0830PE provides two selector positions.
TER defines these as maintained ON-ON positions, meaning that both available positions are selectable operating states rather than an ON position combined with an OFF position.
This distinction is important when selecting the switch for an industrial control application because ON-ON operation provides different control possibilities from ON-OFF or MOM-OFF arrangements.
The specific function assigned to each ON position is determined by the complete machine-control circuit.
Maintained ON-ON Operation
The defining characteristic of PRVV0830PE is its maintained ON-ON operating arrangement.
Both selector positions are maintained, allowing the switch to remain in the selected position after the operator releases the actuator.
This makes PRVV0830PE suitable for compatible applications requiring selection between two persistent control states.
The maintained operating behaviour should be confirmed carefully when replacing an existing selector because a momentary or spring-return switch would provide a different operator interface.
Two Maintained Operating Positions
TER specifies both positions of the PRVV0830PE as maintained.
When the operator moves the selector from one position to the other, the switch is designed to remain in the selected position until it is deliberately changed again.
This allows the selector to provide a stable physical indication of the current selection.
The resulting electrical and machine behaviour depends on how the two contacts are incorporated into the equipment control system.
ON-ON Selector Configuration
The ON-ON designation differentiates PRVV0830PE from selectors incorporating an OFF position.
Rather than providing a neutral OFF state between or alongside operating selections, PRVV0830PE provides two selectable ON states.
This configuration can be useful where the machine requires selection between two alternative operating modes, functions or control states.
The exact meaning of the two ON positions should be defined by the equipment manufacturer and clearly identified for the operator.
2 Contacts Plus 1 Common
TER specifies the PRVV0830PE with 2 contacts plus 1 common.
This electrical arrangement supports the two-position selector configuration and forms part of the manufacturer-defined specification for the component.
The connections should be incorporated into the Hercules joystick and machine-control circuit according to the relevant wiring documentation.
When replacing an existing PRVV0830PE, technicians should identify the original electrical connections before disassembly wherever practical.
Wired TER Selector Switch
Control Devices identifies the PRVV0830PE as a wired selector-switch component for compatible Hercules joystick applications.
This makes it an electrical joystick accessory rather than simply a mechanical selector actuator.
When replacing the component, the switch function, part number and electrical connections should all be verified.
The completed installation should be tested to confirm that both selector positions produce the intended machine-control response.
Suitable for TER Hercules-S Joysticks
Control Devices lists PRVV0830PE as suitable for compatible TER Hercules-S joystick applications.
The Hercules-S industrial joystick can incorporate different pushbuttons and selector switches depending on the required equipment configuration.
Where a Hercules-S joystick requires the 2-position maintained ON-ON selector arrangement, PRVV0830PE provides the corresponding TER manufacturer reference.
The complete joystick configuration should be confirmed before replacement or installation.
Suitable for TER Hercules-CK Joysticks
The PRVV0830PE is also listed by Control Devices as suitable for compatible Hercules-CK joystick applications.
This makes the component relevant to maintenance and refurbishment of Hercules-CK assemblies originally configured with the same ON-ON selector.
Individual Hercules joystick assemblies can vary according to the requirements of the machine on which they are installed.
The original TER part number and electrical function should therefore be verified before a replacement selector is fitted.
Genuine TER Joystick Spare Part
PRVV0830PE is a manufacturer-defined TER component within the Hercules joystick range.
Using the correct TER spare-part number supports accurate identification during maintenance, refurbishment and procurement activities.
It also provides traceability between the installed joystick, electrical documentation and spare-parts inventory.
This can be particularly useful at industrial sites operating multiple machines fitted with different Hercules selector-switch configurations.
Designed for Industrial Operator Controls
Industrial machinery requires operator controls that provide clear and predictable switching behaviour.
The PRVV0830PE provides two stable maintained positions that can be incorporated into a compatible Hercules joystick operator interface.
This allows the machine-control designer to use a single selector to provide two alternative selectable states.
The actual machine function assigned to each position remains determined by the electrical and control-system design.
Maintained Selection Between Two States
The maintained operation of PRVV0830PE allows an operator to choose between two positions without continuously holding the selector.
Once a position is selected, the actuator remains mechanically in that position until the operator deliberately moves it again.
This can provide a convenient interface for applications requiring persistent selection between two machine states or modes.
The appropriateness of this operating behaviour depends on the engineering requirements of the individual machine.
No Dedicated OFF Position
An important characteristic of PRVV0830PE is that its documented operating sequence is ON-ON rather than ON-OFF.
This means the selector should not be treated as a conventional two-position ON-OFF switch.
Both available selector positions form part of the defined switching arrangement.
This distinction should be considered carefully when selecting a replacement component or interpreting the machine wiring.
Selection Between Alternative Machine Functions
A maintained ON-ON selector can be incorporated into equipment where an operator needs to choose between two alternative control states.
Depending on the machine design, these could represent different operating modes, functions or command selections.
The PRVV0830PE provides the electrical selector interface, while the connected machine-control system determines the actual result of each position.
The selector should therefore not be assigned a specific machine function unless that function is confirmed by the equipment documentation.
Operator-Controlled Mode Selection
Two-position maintained selectors can provide an intuitive interface for choosing between two operating modes.
The physical selector position can also provide the operator with a visible indication of the currently selected state.
PRVV0830PE provides this maintained two-position functionality within compatible TER Hercules joystick assemblies.
Appropriate machine labelling should identify the function assigned to each position.
PRVV0830PE Versus PRVV0831PE
PRVV0830PE and PRVV0831PE are both maintained selector switches within the TER Hercules range, but their operating arrangements are different.
PRVV0830PE provides two maintained positions arranged as ON-ON.
PRVV0831PE provides three maintained positions arranged as ON-OFF-ON, adding a central OFF position between its two ON selections.
The two components should therefore be selected according to the exact operator-control and electrical requirements of the machine.
PRVV0830PE Versus PRVV0832PE
PRVV0832PE is another two-position TER selector switch but uses a different operating principle.
PRVV0832PE provides ON-MOM operation with spring return, whereas PRVV0830PE provides two maintained ON-ON positions.
The momentary behaviour of PRVV0832PE is therefore a significant difference from the fully maintained operation of PRVV0830PE.
The two components should not be considered interchangeable simply because both provide two selector positions.
PRVV0830PE Versus PRVV0833PE
PRVV0833PE provides three positions arranged as MOM-OFF-MOM.
This differs substantially from the two maintained ON-ON positions of PRVV0830PE.
PRVV0833PE provides temporary momentary selections around a central OFF position, while PRVV0830PE provides two stable maintained selections.
The appropriate component depends on the required operator interface and machine-control logic.
PRVV0830PE Versus PRVV0834PE
PRVV0834PE provides three-position ON-OFF-MOM operation, combining maintained and momentary switching behaviour.
PRVV0830PE instead provides a simpler two-position maintained ON-ON arrangement.
The two switches therefore differ in position count, switching sequence and operator behaviour.
The exact TER part number should be confirmed before replacement.
PRVV0830PE Versus PRVV0840PE
PRVV0830PE and PRVV0840PE are both two-position maintained selector switches, but they provide different switching sequences.
PRVV0830PE provides ON-ON operation, whereas PRVV0840PE provides maintained ON-OFF operation.
This difference is important because PRVV0840PE includes an OFF selection while PRVV0830PE provides two ON states.
The two components should therefore not be substituted without confirming the intended machine-control function.
PRVV0830PE Versus PRVV0842PE
PRVV0842PE provides a two-position MOM-OFF selector arrangement.
PRVV0830PE instead provides two maintained ON-ON positions.
The two selectors therefore differ in both switching sequence and maintained versus momentary operating behaviour.
Part-number verification should be completed before selecting a replacement component.
Part of the TER Hercules Selector Switch Range
PRVV0830PE forms part of TER’s wider selector-switch range for compatible Hercules industrial joysticks.
The range includes two-position and three-position selectors with maintained, momentary and mixed operating arrangements.
This allows Hercules joystick assemblies to be configured for different industrial operator-control requirements.
The exact selector-switch code is therefore an important part of the overall joystick specification.
Industrial Crane Control Applications
TER Hercules joysticks are designed for industrial handling and machine-control applications, including crane-control environments where robust operator interfaces are required.
The PRVV0830PE can provide an auxiliary maintained selector function where the machine design requires selection between two persistent control states.
The exact crane function associated with each ON position depends on the electrical and control-system configuration.
The switch should therefore be installed according to the original equipment design and wiring documentation.
Crane Cabin Operator Controls
Industrial crane cabins can combine primary joystick movement with selector switches and pushbuttons for auxiliary machine functions.
PRVV0830PE can form part of this interface where a two-position maintained ON-ON selector is required.
Its stable positions allow the selected state to remain mechanically indicated at the control.
The complete control station should be configured and tested according to the requirements of the machine manufacturer.
Hoist and Winch Control Applications
TER Hercules joysticks can also be incorporated into industrial hoist and winch control systems.
Where an auxiliary two-position maintained selector is required, PRVV0830PE provides a documented TER component option.
The selector itself does not determine the hoist or winch function.
The resulting equipment operation depends on how the selector contacts are incorporated into the complete control circuit.
Material Handling Equipment
Industrial material-handling equipment can require auxiliary operator selections in addition to primary joystick movement.
A maintained ON-ON selector can provide a compact method of choosing between two alternative control states where this functionality is required.
PRVV0830PE provides this operator interface within compatible Hercules-S and Hercules-CK joystick configurations.
The actual machine response remains dependent on the electrical system.
Industrial Automation Applications
Automated and semi-automated machinery can incorporate manual selector inputs for operating modes and auxiliary machine functions.
The PRVV0830PE can provide two maintained selection states where an ON-ON interface is required.
A PLC, relay circuit or other machine-control system can then interpret the corresponding electrical state according to the equipment design.
This allows the selector to function as one component within a broader industrial control architecture.
Maintaining Existing Hercules Joysticks
PRVV0830PE may be required when maintaining an existing Hercules-S or Hercules-CK joystick fitted with the same selector-switch configuration.
The existing part number and ON-ON operating arrangement should be identified before removal wherever practical.
The electrical connections should also be documented to support accurate reconnection of the replacement selector.
Following installation, both switch positions and their associated machine functions should be tested.
Joystick Refurbishment
Refurbishment of an industrial Hercules joystick can involve replacement of selected switches and other components while retaining serviceable parts.
Where the existing assembly requires a two-position maintained ON-ON selector, PRVV0830PE provides the corresponding TER manufacturer reference.
The original wiring arrangement and selector function should be recorded during the refurbishment process.
The completed joystick should be functionally tested before being returned to service.
Replacement Following Selector Damage
A selector switch may require replacement following mechanical damage, wear or an identified electrical fault.
If the original component is PRVV0830PE, using the same TER part number helps preserve the intended two-position maintained ON-ON behaviour.
Associated wiring and surrounding joystick components should also be inspected if physical damage has occurred.
Replacement of the selector alone should not be assumed to correct unrelated faults elsewhere within the control system.
Confirm ON-ON Before Ordering
One of the most important checks before ordering PRVV0830PE is confirming that ON-ON operation is required.
The selector does not provide a dedicated OFF position and should not be confused with TER’s two-position ON-OFF selector alternatives.
The existing TER part number, electrical drawing and equipment documentation should be checked wherever practical.
This can help prevent selection of a switch with a different operating sequence.
Confirm Two Maintained Positions
PRVV0830PE is specifically designed with two maintained selector positions.
This differentiates it from spring-return selectors and three-position selector-switch configurations within the Hercules range.
Both the number of positions and maintained operating behaviour should be confirmed before replacement.
These characteristics form an important part of the switch specification.
Maintained Versus Momentary Operation
The distinction between maintained and momentary operation is fundamental when selecting an industrial selector switch.
A maintained selector remains in its selected position after the operator releases it, whereas a momentary position is intended for temporary actuation.
PRVV0830PE provides maintained operation in both of its positions.
This operating behaviour should normally be preserved when replacing an existing PRVV0830PE.
Verify Electrical Connections
TER specifies PRVV0830PE with 2 contacts plus 1 common.
The correct identification of these electrical connections is important during replacement or installation.
The relevant machine wiring documentation should be used to determine how the selector is incorporated into the control circuit.
The completed installation should be electrically and functionally tested before normal machine operation resumes.
Do Not Select by Appearance Alone
Several TER Hercules selector switches belong to the same general accessory family but provide different switching characteristics.
A component that appears similar may provide an OFF position, spring-return operation, momentary switching or three selector positions.
PRVV0830PE should therefore be identified by its exact TER code and two-position maintained ON-ON specification.
This provides greater confidence that the correct replacement component has been selected.
OEM Machine Building Applications
Original equipment manufacturers can specify PRVV0830PE where a compatible Hercules joystick requires a two-position maintained ON-ON selector.
The TER part number can be incorporated into electrical drawings, bills of materials, assembly documentation and recommended spare-parts lists.
This supports repeatable machine construction and provides a clear replacement reference for future maintenance.
The functions assigned to the two selector positions should also be documented clearly within the equipment control system.
Machine Commissioning
During machine commissioning, both maintained positions of PRVV0830PE should be tested against the intended equipment operation.
Each position should remain selected as designed and produce the corresponding electrical state required by the control system.
The resulting machine functions should be verified against the electrical documentation.
Any unexpected response should be investigated before the equipment enters normal service.
Preventative Maintenance
Selector switches can be incorporated into routine inspection programs for industrial joystick controls.
Technicians can check the physical condition of the selector, movement between positions, maintained positioning and correct machine response according to the applicable maintenance procedure.
If PRVV0830PE requires replacement, the manufacturer code provides a clear spare-part reference.
Other accessible Hercules joystick components can also be inspected while maintenance access is available.
Spare Parts Inventory Management
Industrial facilities operating several TER Hercules joystick configurations can benefit from detailed spare-parts descriptions.
A description such as TER PRVV0830PE Selector Switch – 2 Maintained Positions ON-ON provides significantly more information than a generic selector-switch entry.
This helps stores and maintenance personnel distinguish PRVV0830PE from related TER selector switches.
Accurate inventory descriptions can reduce component-selection errors during planned and urgent maintenance.
Manufacturer Part-Number Traceability
The PRVV0830PE code can be linked directly to the relevant joystick, machine asset, electrical drawing and spare-parts inventory.
This provides a consistent component reference throughout the equipment lifecycle.
Part-number traceability becomes particularly useful where several similar Hercules joystick configurations are installed within the same facility.
Future technicians can identify the required selector without relying solely on physical appearance.
Supporting a Consistent Operator Interface
Replacing a selector with the correct operating configuration helps preserve the operator interface originally designed for the machine.
PRVV0830PE provides two maintained ON positions.
Substituting a momentary or ON-OFF selector could alter the way the operator interacts with the equipment and the electrical state presented to the control system.
Any intentional change in selector behaviour should be evaluated as an engineering modification rather than routine spare-part replacement.
Stable Physical Position Indication
Because both PRVV0830PE positions are maintained, the physical position of the selector can provide an indication of the current selection.
This can support an intuitive operator interface where two persistent machine states are available.
The labels or markings associated with the joystick should clearly identify the function represented by each position.
The exact meaning of each state remains dependent on the equipment design.
Supporting Two Defined Machine States
The ON-ON arrangement provides two defined electrical selection states from a single selector switch.
This can be used where the machine requires the operator to choose between two alternative functions or modes.
PRVV0830PE provides the selector interface while the machine-control circuitry determines the resulting operation.
Correct wiring, labelling and commissioning are therefore important parts of the complete installation.
Part of the TER Hercules Spare Parts System
PRVV0830PE forms part of TER’s broader Hercules joystick spare-parts and accessory system.
Related components include other selector switches, pushbuttons, lever guides, bellows and identification accessories used with compatible Hercules assemblies.
This component-based approach allows specific items to be identified during maintenance and refurbishment.
Each component should be selected according to the exact joystick specification.
Related TER Selector Switches
TER documents several selector-switch configurations for Hercules industrial joysticks.
Related codes include PRVV0831PE, PRVV0832PE, PRVV0833PE, PRVV0834PE, PRVV0840PE and PRVV0842PE.
These components differ in their position count and maintained or momentary operating behaviour.
The exact TER manufacturer code should therefore be used when specifying a replacement.
PRVV0831PE – 3 Position ON-OFF-ON
PRVV0831PE provides three maintained positions arranged as ON-OFF-ON.
PRVV0830PE instead provides two maintained positions arranged as ON-ON.
The central OFF position available with PRVV0831PE is therefore absent from the PRVV0830PE operating sequence.
The appropriate selector depends on the required machine-control configuration.
PRVV0832PE – 2 Position ON-MOM
PRVV0832PE provides two positions with ON-MOM spring-return operation.
This differs from the two fully maintained ON-ON positions of PRVV0830PE.
Although both components have two selector positions, their operator behaviour is substantially different.
The original TER part number and switching requirement should be confirmed before replacement.
PRVV0833PE – 3 Position MOM-OFF-MOM
PRVV0833PE provides three-position MOM-OFF-MOM operation.
Its two outer operating positions are momentary, with a central OFF position between them.
PRVV0830PE instead provides two maintained ON positions and no dedicated OFF position.
The two selectors are therefore intended for different operator-control requirements.
PRVV0834PE – 3 Position ON-OFF-MOM
PRVV0834PE provides a three-position ON-OFF-MOM selector configuration.
This combines maintained and momentary operation around a central OFF position.
PRVV0830PE uses a different two-position maintained ON-ON arrangement.
The correct selector should be selected according to the original Hercules joystick specification.
PRVV0840PE – 2 Position ON-OFF
PRVV0840PE is a two-position maintained selector like PRVV0830PE, but its switching sequence is ON-OFF.
PRVV0830PE instead provides ON-ON operation.
This makes PRVV0840PE the appropriate TER option where the specified selector requires a maintained OFF position rather than two selectable ON states.
The two switches should not be considered interchangeable without reviewing the control circuit.
PRVV0842PE – 2 Position MOM-OFF
PRVV0842PE provides two-position MOM-OFF operation.
It differs from PRVV0830PE through both its momentary behaviour and inclusion of an OFF position.
PRVV0830PE provides two maintained ON states instead.
The machine documentation and original TER part number should guide replacement selection.
Electrical Troubleshooting
If an installed PRVV0830PE does not produce the expected machine response, troubleshooting should consider the complete electrical control circuit.
The selector contacts, common connection, wiring and downstream control equipment can all influence the resulting function.
The physical selector should also be checked to confirm that it moves and remains correctly in each of its two maintained positions.
Electrical testing should be carried out using appropriate procedures for the machinery involved.
Replacement and Functional Testing
After replacing a PRVV0830PE, both maintained selector positions should be tested before normal machine operation resumes.
Each position should produce the intended electrical state and corresponding machine-control response.
The selector should remain mechanically in the selected position until deliberately moved.
Testing the complete function helps verify both the replacement component and its electrical connections.
Supporting Long-Term Hercules Joystick Maintenance
Industrial machinery can remain operational for many years, making accurate spare-part information valuable throughout the equipment lifecycle.
Recording PRVV0830PE together with the description 2 Position Maintained ON-ON Selector Switch provides a clear maintenance reference.
This is especially useful where several TER selector-switch variants are used across a facility.
Detailed component records can support efficient future procurement, maintenance and troubleshooting.
PRVV0830PE from Control Devices Australia
Control Devices supplies TER industrial joysticks, joystick accessories and replacement components for industrial machine-control applications.
The TER PRVV0830PE Selector Switch is listed as a wired two-position maintained ON-ON joystick accessory suitable for Hercules-S and Hercules-CK joysticks.
Providing the full PRVV0830PE manufacturer code when requesting a replacement helps clearly identify the required selector configuration.
The existing joystick and machine electrical arrangement should be confirmed before installation.
Why Choose the TER PRVV0830PE Selector Switch?
The TER PRVV0830PE provides a clearly defined two-position maintained ON-ON switching arrangement for compatible Hercules joystick applications.
Its two stable operating positions distinguish it from TER selector switches incorporating OFF positions, spring-return operation or momentary commands.
The documented 2 contacts plus 1 common arrangement and dedicated TER manufacturer code provide accurate component identification for maintenance, refurbishment and machine construction.
For compatible Hercules-S and Hercules-CK joystick configurations requiring maintained ON-ON operation, PRVV0830PE provides the corresponding TER selector-switch reference.
Genuine TER 2-Position Maintained ON-ON Selector Switch
The TER PRVV0830PE Selector Switch is a genuine electrical component for compatible Hercules industrial joystick assemblies.
TER identifies PRVV0830PE as a two-position maintained ON-ON selector with 2 contacts plus 1 common, while Control Devices lists the wired component for Hercules-S and Hercules-CK joystick applications.
Correct identification of the manufacturer part number, two-position arrangement and maintained ON-ON behaviour helps support accurate maintenance, replacement and equipment configuration.
For replacement or new-build requirements, specify TER PRVV0830PE 2 Position Maintained ON-ON Wired Selector Switch and confirm the complete Hercules joystick and electrical configuration before installation.
